×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

why register change?

Unanswered Question
Aug 25th, 2003
User Badges:

hi, another question, why every time when I config config-register to 0x2102 in my both MSFC3, after power off and power on it will become 0x0?

1. before reboot 6513:

Router>show bootvar

BOOT variable = bootflash:c6msfc3-jk9o3sv-mz.122-14.SX2.bin,1

CONFIG_FILE variable does not exist

BOOTLDR variable does not exist

Configuration register is 0x2102

2. after reboot 6513 one or twice

Router>sh bootvar

BOOT variable does not exist

CONFIG_FILE variable does not exist

BOOTLDR variable does not exist

Configuration register is 0x0


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
amritpatek Mon, 09/01/2003 - 13:30
User Badges:
  • Silver, 250 points or more

Guess, you did not save the configuration after issuing the config-register command. Start the reload after saving the config. Before that, you could go through the following document for more details:


Upgrade Procedure for Systems Running Catalyst OS on the Supervisor Engine and Cisco IOS on the MSFC

http://www.cisco.com/en/US/products/hw/switches/ps708/prod_release_note09186a008019eaeb.html#160129


Actions

This Discussion