×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

CAT-6506: BOOTFLASH Directory shows 0 files inside

Unanswered Question
Aug 31st, 2003
User Badges:

First of all thanking all of u that spent time in going thru my issues.


Here is the story:



I knew that one of my CAT-6506 ( Cat OS 6.3(5) ) here is been converted out from Native to Hybrid Long back. When I enter dir bootflash from Sup Mode, it shows that “no files on bootflash:”, though "show boot " ( bootvar) shows that last reboot took the “first image” image from directory directory "bootflash" ( sup-bootflash) . Pelase see below.


In_Qed_Cont_6506_02> show boot

BOOT variable = bootflash:,1;

CONFIG_FILE variable = slot0:switch.cfg


Configuration register is 0x10f

ignore-config: disabled

auto-config: non-recurring, overwrite, sync disabled

console baud: 9600

boot: image specified by the boot system commands



In_Qed_Cont_6506_02> dir bootflash:

No files on device

31981568 bytes available (0 bytes used)



Now my question here is


01. “ Am I going to be in trouble if I reboot this switch by any chance ?

02. Why didn’t I seen the Cat6000*.sup2.xxx file on sup-bootflash: ?

03. Do you think that file system format on Flash card is still on Native Mode (not CAT OS format )hence it is unable to see it ?

04. What do u advice in this scenario. ? I have already opened a TAC case while my

TAC engineer didn’t given me a proper answer

05. If item#3 is TRUE, Can I format my sup-bootflash ? I hope this doesn’t impact on its switching/mls/l2 process unless it gets powerdown in between .


Looks to have your Immediate help. Once again thanks for bearing me …








In_Qed_Cont_6506_02> show module

Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP2-2GE yes ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok

2 2 8 1000BaseX Ethernet WS-X6408A-GBIC no ok

3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok


Mod Module-Name Serial-Num

--- -------------------- -----------

1 SAL06386BAM

15 SAL06375WL2

2 SAL06261Y2L

3 SAL06334R6L


Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-06-d6-5b-d8-aa to 00-06-d6-5b-d8-ab 3.10 7.1(1) 6.3(5)

00-06-d6-5b-d8-a8 to 00-06-d6-5b-d8-a9

00-0b-45-22-1f-80 to 00-0b-45-22-23-7f

15 00-09-12-38-23-80 to 00-09-12-38-23-bf 2.5 12.1(8b)E1 12.1(8b)E11

2 00-09-12-7b-03-f8 to 00-09-12-7b-03-ff 2.1 5.4(2) 6.3(5)

3 00-0a-b7-53-22-68 to 00-0a-b7-53-22-97 6.1 5.4(2) 6.3(5)


Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- ----------------------- ------------------- ----------- ------

1 L3 Switching Engine II WS-F6K-PFC2 SAL063764B7 3.3

In_Qed_Cont_6506_02>

In_Qed_Cont_6506_02>

In_Qed_Cont_6506_02> show ver

WS-C6506 Software, Version NmpSW: 6.3(5)

Copyright (c) 1995-2002 by Cisco Systems

NMP S/W compiled on Feb 7 2002, 19:33:49


System Bootstrap Version: 7.1(1)


Hardware Version: 3.0 Model: WS-C6506 Serial #: TBM06403951


PS1 Module: WS-CAC-1300W Serial #: SNI06290203

PS2 Module: WS-CAC-1300W Serial #: SNI06290197


Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP2-2GE SAL06386BAM Hw : 3.10

Fw : 7.1(1)

Fw1: 6.1(3)

Sw : 6.3(5)

Sw1: 6.3(5)

WS-F6K-PFC2 SAL063764B7 Hw : 3.3

2 8 WS-X6408A-GBIC SAL06261Y2L Hw : 2.1

Fw : 5.4(2)

Sw : 6.3(5)

3 48 WS-X6348-RJ-45 SAL06334R6L Hw : 6.1

Fw : 5.4(2)

Sw : 6.3(5)

15 1 WS-F6K-MSFC2 SAL06375WL2 Hw : 2.5

Fw : 12.1(8b)E11

Sw : 12.1(8b)E11


DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 130944K 62392K 68552K 32768K 1537K 31231K 512K 335K 177K


Uptime is 278 days, 4 hours, 24 minutes

In_Qed_Cont_6506_02>



















  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion