×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Saving CCM's RTM configuration

Answered Question
Sep 1st, 2003
User Badges:

The CallManager's Real-Time Monitoring Tool comes with a "CM-Default" configuration. When I close the RTM window (in MS Internet Explorer), all my changes are lost. How do I make changes permanent, and how do I generate a new configuration next to CM-Default?

Correct Answer by Anonymous (not verified) about 13 years 11 months ago

This document might give you an insight into the problem.


Real-Time Monitoring Configuration

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00800c4d49.html#80423


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dvb Tue, 09/09/2003 - 01:44
User Badges:

Thank you, this helped. Unfortunately, with this information I found out that configured and saved alarms do not work once the RTM window is closed. This renders the RTM alarm mechanism rather useless.

Actions

This Discussion