cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
933
Views
0
Helpful
6
Replies

Code FEAC ERROR

nikita_kayell
Level 1
Level 1

I am trying to find out what the FEAC code that is kicking back from the the description below mean.

00:00:12: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

00:00:12: FEAC Code: 0x16

00:00:12: %SYS-5-CONFIG_I: Configured from memory by console

00:00:12: %SYS-5-RESTART: System restarted --

Cisco Internetwork Operating System Software

IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(3a)T3, RELEASE SOFTWARE

(fc1)

Copyright (c) 1986-2000 by cisco Systems, Inc.

Compiled Wed 06-Sep-00 00:04 by ccai

00:00:13: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,

chang

ed state to up

00:00:15: FEAC Code: 0x16

00:00:15: %LINK-3-UPDOWN: Interface ATM2/0, changed state to down

00:00:15: FEAC Code: 0x3F

00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM2/0, changed state

to down

00:04:36: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,

chang

ed state to down

00:04:43: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0,

chang

ed state to up

00:19:30: %LINK-3-UPDOWN: Interface ATM2/0, changed state to up

00:20:30: FEAC Code: 0x0E

00:20:31: FEAC Code: 0x3F

00:20:32: %LINK-3-UPDOWN: Interface ATM2/0, changed state to down

00:20:42: %LINK-3-UPDOWN: Interface ATM2/0, changed state to up

6 Replies 6

thisisshanky
Level 11
Level 11

FEAC stands for Far-End Alarm and Control

Sankar Nair
UC Solutions Architect
Pacific Northwest | CDW
CCIE Collaboration #17135 Emeritus

Thank you! I know that part, I also know that is a feature for that type of router. But I was looking for more specific details. I was looking to get a more detail explanition on the actual 0x16 etc.. i was hoping someone might have seen something similar. Thank you!

Nikita

what you have to do is convert this binary to hex

011001 DS3 equipment failure hex value 0x19

001110 LOS hex value 0xE

010110 AIS hex value 0x16

000000 OOF hex value 0x0

011010 DS3 IDLE hex value 0xE

001111 DS3 equip failure hex value F

011101 Common equip failure hex value 1D

line loop activate 000111 hex value 0x7

line loop deactivate 001110 hex value 0x1c

DS3 line 011011 hex value 0x1B

Thank you very much this has been very helpful. May I ask how you come up with such information? I have just begun to take my first Cisco class. I have not reached that level yet. Is all very facinating. Thank you for your help. Hope to here back

I beleve that one of my coworkers found it on the ATM forum website

Well, thank you for your help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco