×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

interface virtual access/virtual-template

Answered Question
Sep 13th, 2003
User Badges:
  • Red, 2250 points or more

hi all


whts the purpose of creating or configuring these 2 interface?whts the function of these interfaces ?


thx

prem

Correct Answer by liviu.gheorghe about 13 years 11 months ago

When configuring virtual dialer profiles, the virtual-template interface acts as a general placeholder for parameters you want to asign to dial-in users.

When a user dials into your NAS, a virtual-access interface is "cloned" from the virtual-template interface. The rest of the parameters, access-lists, ip address, routing info, etc, can be asigned from your AAA server for the specific user that dials into the NAS.

Take a look at the following links:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt8/dafvrtmp.htm

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt8/dafvprof.htm

Cheers

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
liviu.gheorghe Sat, 09/13/2003 - 07:33
User Badges:
  • Bronze, 100 points or more

When configuring virtual dialer profiles, the virtual-template interface acts as a general placeholder for parameters you want to asign to dial-in users.

When a user dials into your NAS, a virtual-access interface is "cloned" from the virtual-template interface. The rest of the parameters, access-lists, ip address, routing info, etc, can be asigned from your AAA server for the specific user that dials into the NAS.

Take a look at the following links:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt8/dafvrtmp.htm

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fdial_c/fnsprt8/dafvprof.htm

Cheers

Actions

This Discussion