09-16-2003 01:11 AM - edited 03-13-2019 01:37 AM
hi,
i'm developing a service, which grabs the caller id of an incoming call, and pushes informations to the called phone's display! but to push the info's to the phone (with the ciscoipphoneexecute tag), i need to know the called phone's ip address! i'm able to get the mac-address (f.e. sep123456789) and the dn (f.e. 123) of the phones, but how to get the ip addresses of the phone?
has anyone an idea?
thx jochen
09-16-2003 08:46 AM
Have you looked at the DeviceListX functionality? It's documented in the IPPS SDK, and should solve your problem...
09-16-2003 11:08 PM
hi, thanks for your fast reply!
i have the ipps sdk, but i can't find something like DeviceListX? could you give me a hint? when search cisco.com i also found nothing?
thx, jochen
09-16-2003 11:15 PM
sorry, i found it!
i have the sdk 3.3.2, but DeviceListX is available in ccm 3.3.3!
thx jochen
12-25-2003 05:46 AM
With CCM 3.3 and above, you can actually do a sendData() to the terminal. This is called XSI Device Data Pass Through. For this, you do not need to know the Ip address of the Cisco IP Phone that you are pushing to. All you need to have is a TerminalObserver. Check it out, and/or contact tapi_jtapi-sdp@cisco.com for more details.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide