Router 3725 does not boot

Unanswered Question
Sep 18th, 2003
User Badges:

Dear ,


A 3725 router with a E1 module(G703) does not boot.I have unpacked the router and configure it and it works only 2(two) days!!! properly.From the LED panel, only the PWR LED is solid green.SYS/RPS has no activity.


Would you please guide me what should I do with the router and what is the trouble with router..


Yours truely,


Bikash

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
deilert Thu, 09/18/2003 - 05:19
User Badges:
  • Silver, 250 points or more

can you plug a PC in to the console and connect via hyperterm and power cycle the box. Then post what you capture in your hyperterm session

cminch Thu, 09/18/2003 - 05:43
User Badges:

Hi,


Also doing a sh ver, will also tell you what might have caused the problem, if you get that far. If you are in ROMMON you need to boot the system file by, doing a dir bootflash: or flash: and copy the file name usually a .bin file. Then tell it to boot then it should be up and running. there is still a lot you need to do to make sure this dosen't happen but we need to see how far you get first.


regards,

Corey

bikash_bd Thu, 09/18/2003 - 05:58
User Badges:

Dear,

There is none when i connect via console.no prompt no response, none,, nothing.SYS/RPS does not show anything

Actions

This Discussion