09-18-2003 05:17 AM - edited 03-02-2019 10:25 AM
Dear ,
A 3725 router with a E1 module(G703) does not boot.I have unpacked the router and configure it and it works only 2(two) days!!! properly.From the LED panel, only the PWR LED is solid green.SYS/RPS has no activity.
Would you please guide me what should I do with the router and what is the trouble with router..
Yours truely,
Bikash
09-18-2003 05:19 AM
can you plug a PC in to the console and connect via hyperterm and power cycle the box. Then post what you capture in your hyperterm session
09-18-2003 05:38 AM
There is no message collected from by console
09-18-2003 05:43 AM
Hi,
Also doing a sh ver, will also tell you what might have caused the problem, if you get that far. If you are in ROMMON you need to boot the system file by, doing a dir bootflash: or flash: and copy the file name usually a .bin file. Then tell it to boot
regards,
Corey
09-18-2003 05:58 AM
Dear,
There is none when i connect via console.no prompt no response, none,, nothing.SYS/RPS does not show anything
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide