2900 XL Restarts and Locks Up

Unanswered Question
Sep 19th, 2003
User Badges:

I have a 2924 Xl Switch and it restarts all of a sudden and also seems to lock up sometimes. It passess all the POST test fine however it simply restarts on its own after a while . Has anyone ever seen this behavior? I have also tried reloading a new image.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
DALE FRANCIS Sun, 09/21/2003 - 01:22
User Badges:
  • Bronze, 100 points or more

Sounds like a H/W issue, are there any error msg's.?

If you do a sh ver it will tell you why it reloaded.

I have had similar isses with other devices which all it took was to remove and rebuild the config.

kpahare Mon, 09/22/2003 - 19:59
User Badges:

in my case it shows "Last reset from warm reset". and i dont need to make any config changes. sometimes simply rebooting the switch let the things working.

kpahare Mon, 09/22/2003 - 19:57
User Badges:

yes i do have this problem in plenty of my 2924-MXL-EN switches. they shows exactly same behaviour (Sometimes they Reboot all of sudden, or just gets hanged) with all the port LED's down and module LED amber. when i remove the fiber module (2922-xl-v) and install a Tx/Rx it works fine. it is very frequent and my customer is killing me.

dagaued Mon, 09/22/2003 - 20:06
User Badges:

So does anyone know how to fix this issue, or at least how to troubleshoot it.

kpahare Mon, 09/29/2003 - 05:40
User Badges:

in my case the ping to management ip, frequently shows 60 ms reply, and "show proc cpu" shows 50% utilisation whereas it is on no-load (no pcs are connected to it).

is something wrong with the hardware?


This Discussion