×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Associations between AP's

Unanswered Question
Oct 7th, 2003
User Badges:

I currently have multiple 1200 series AP's. For some reason I cannot see any other AP's except the AP I am currently on in the association table. Also when trying to puch config to other ap's I fall into an INACTIVE state.

Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
kmarrero Mon, 10/13/2003 - 06:36
User Badges:
  • Bronze, 100 points or more

Check the APs association table and make sure that it sees the other two APs. If it does not, then you may need to reconfigure the APs as possibly the configuration could be stuck or corrupted. There could as well be interference or firmware issues. Check your firmware to see if you are on the latest build.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode