×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

DLink Cardbus connection to AP1200

Unanswered Question
Oct 7th, 2003
User Badges:

I have setup an AP1200 and client with DLink DWL-650. AP's authentication is setup as 128bit with shared key. The client is running windows 2000. The client can connect with the AP and this is verified by looking at the AP's log, I can see the IP address of the client given by a DHCP server and it shows that the client is authenticated and associated.


The problem is when I do a test (ping) from the AP to the client and vice versa it fails. Or if I ping the client from anywhere in my network it also fails.


Did I configure the AP correctly? Or do I need to do something else.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
m.singer Thu, 10/16/2003 - 08:03
User Badges:
  • Bronze, 100 points or more

When the pings timed out, was there any event logs on the AP?

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode