×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

ISDN Issue

Unanswered Question
Oct 8th, 2003
User Badges:

who can help me to solve the isdn issue that the router cannot construct the isdn call well? the related debug infor is follow:



4w0d: ISDN Se2/0:15: event CALL_PROGRESS dsl 0

4w0d: ISDN Se2/0:15: CALL_PROGRESS: CALL_CONNECTED call id 0x3196, bchan 9, dsl0

4w0d: ISDN Se2/0:15: RX <- DISCONNECT pd = 8 callref = 0x0011

4w0d: Cause i = 0x8090 - Normal call clearing

4w0d: Progress Ind i = 0x8088 - In-band info or appropriate now availab

4w0d: ISDN Se2/0:15: LIF_EVENT: ces/callid 1/0x3194 CALL_DISC

4w0d: ISDN Se2/0:15: TX -> RELEASE pd = 8 callref = 0x8011

4w0d: ISDN Se2/0:15: RX <- RELEASE_COMP pd = 8 callref = 0x0011

4w0d: ISDN Se2/0:15: CCPRI_ReleaseCall(): bchan 8, call id 0x3194, call type VOE

4w0d: CCPRI_ReleaseChan released b_dsl 0 B_Chan 8

4w0d: ISDN Se2/0:15: LIF_EVENT: ces/callid 1/0x3194 CALL_CLEARED

4w0d: ISDN Se2/0:15: received CALL_CLEARED call_id 0x3194

4w0d: ISDN Se2/0:15: Outgoing call id = 0x83CF, dsl 0

4w0d: ISDN Se2/0:15: process_pri_call(): call id 0x83CF, number 01066114433, spE

4w0d: building outgoing channel id for call nfas_int is 0 len is 0

4w0d: ISDN Se2/0:15: TX -> SETUP pd = 8 callref = 0x03CF

4w0d: Bearer Capability i = 0x8090A3

4w0d: Channel ID i = 0xA9839F

4w0d: Calling Party Number i = 0x80, '02895519', Plan:Unknown, Type:Unkn

4w0d: Called Party Number i = 0x80, '01066114433', Plan:Unknown, Type:Un

4w0d: ISDN Se2/0:15: RX <- CALL_PROC pd = 8 callref = 0x83CF

4w0d: Channel ID i = 0xA9839F

4w0d: Progress Ind i = 0x8288 - In-band info or appropriate now availab

4w0d: ISDN Se2/0:15: LIF_EVENT: ces/callid 1/0x83CF CALL_PROCEEDING


4w0d: ISDN Se2/0:15: PRI Event: 6, bchan = 30, call type = VOICE

4w0d: (Se2/0:15) TX call proc to appl thru CDAPI,call_id (0x83CF)

4w0d: ISDN Se2/0:15: RX <- DISCONNECT pd = 8 callref = 0x83CF

4w0d: Cause i = 0x8295 - Call rejected

4w0d: Progress Ind i = 0x8288 - In-band info or appropriate now availab

4w0d: ISDN Se2/0:15: LIF_EVENT: ces/callid 1/0x83CF CALL_DISC

4w0d: ISDN Se2/0:15: TX -> RELEASE pd = 8 callref = 0x03CF

4w0d: ISDN Se2/0:15: RX <- RELEASE_COMP pd = 8 callref = 0x83CF

4w0d: ISDN Se2/0:15: CCPRI_ReleaseCall(): bchan 31, call id 0x83CF, call type VE

4w0d: CCPRI_ReleaseChan released b_dsl 0 B_Chan 31

4w0d: ISDN Se2/0:15: LIF_EVENT: ces/callid 1/0x83CF CALL_CLEARED

4w0d: ISDN Se2/0:15: received CALL_CLEARED call_id 0x83CF

4w0d: ISDN Se2/0:15: process_disconnect(): call id 0x3195, call type is VOICE, )

4w0d: ISDN Se2/0:15: TX -> DISCONNECT pd = 8 callref = 0x800E

4w0d: Cause i = 0x8090 - Normal call clearing

4w0d: ISDN Se2/0:15: RX <- RELEASE pd = 8 callref = 0x000E

4w0d: ISDN Se2/0:15: CCPRI_ReleaseCall(): bchan 9, call id 0x3195, call type VOE

4w0d: CCPRI_ReleaseChan released b_dsl 0 B_Chan 9

4w0d: ISDN Se2/0:15: LIF_EVENT: ces/callid 1/0x3195 CALL_CLEARED

4w0d: ISDN Se2/0:15: received CALL_CLEARED call_id 0x3195

4w0d: ISDN Se2/0:15: TX -> RELEASE_COMP pd = 8 callref = 0x800E

callcenter_CD#

4w0d: ISDN Se2/0:15: RX <- SETUP pd = 8 callref = 0x0007



who can help me to explain the debug infor and give me a right advice to solve the problem? Thanks


Sincerely

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
deilert Thu, 10/09/2003 - 04:12
User Badges:
  • Silver, 250 points or more

Is this a data or voice call ? It looks like the switch is only provisioned for one of these settings , call the carrier and have them check the switch to ensure it is configured for the type of call you are palcing , either voice or data or both .

Actions

This Discussion