×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

PIX 501 on a LAN

Unanswered Question
Oct 13th, 2003
User Badges:

I purchased the PIX 501 for my home broadband connection. Prior to installing it, I am trying to learn it at work.


I can't get ethernet0 to accept a DHCP assigned ip. Probably something simple.


Should I be using a crossover or straight through cable ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dmunyak Mon, 10/13/2003 - 08:20
User Badges:

Good stuff but I still can't get connected to the LAN.


I have tried using a straight through cable and cross over. When I issue the command sho ip, the line protocol for ethernet0 is down for either cable. I know both cables are working.


I have even tried to statically assign an IP to ethernt0. still, the line protocol is down.



dmunyak Mon, 10/13/2003 - 09:02
User Badges:

Stupid is as stupid does !!!!!!!!


Forget the support. Thanks anyway, but It helps to look at the switch speed. I had the PIX plugged into a 100mb switch.


Everything is working

Actions

This Discussion