Multilink and QOS

Unanswered Question
Oct 14th, 2003
User Badges:

Hi all, I've a quick question, we are going to use mlppp to make a 3 meg pipe out of 2 t1's, but now we have been asked to take some of that bandwidth to use for out of band management, for example telnet, ftp, etc, we would need about 256k for this type of traffic, which would be the best way to do this, CAR, QOS etc, the current peak on the link is 2.3 meg. The current data is Multicast Traffic. And it is very important that we don't affect the performance of the multicast traffic.

Thanks in advance for the advice.


Dave

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dave-oconnor Tue, 10/14/2003 - 08:07
User Badges:

Also we have 2600 routers, will CAR etc work on this platform.

Georg Pauwen Tue, 10/14/2003 - 08:52
User Badges:
  • Purple, 4500 points or more
  • Cisco Designated VIP,

    2017 WAN

Hello Dave,


I would configure Class-Based Weighted Fair Queuing, you can configure a class for each traffic type and assign bandwidth or precedence to the class. Here is a link to how to configure CBWFQ;


http://www.cisco.com/en/US/products/sw/iosswrel/ps1830/products_feature_guide09186a0080087a84.html


CAR is, to my best knowledge, only supported on the 7000, 7200, and the 7500 series.


Regards,


Georg

Actions

This Discussion