Blocking Inbound - from PSTN - calls from ringing internal Registered CCM

Unanswered Question
Oct 15th, 2003
User Badges:

I have found numerous cli - commands on gateways to deny inbound calls on voice gateways in dial peer config mode . What if you have a PRI , and you have say 3 numbers out in the PSTN world that you want to deny calling your DID range , has anyone done this on a gateway or via call manager ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
dugrant Wed, 10/15/2003 - 15:09
User Badges:
  • Bronze, 100 points or more

It isnt possible yet to route/block calls based on calling number in CM.

andy.g.mrozek Wed, 10/15/2003 - 15:15
User Badges:

How about on the gateway , if it can't be done in CCM - their are multiple commands for this , but all are related to being in dial peer config mode , if you have a pri with mgcp configured gateway , where would you resrict inbound calls from ?

dugrant Wed, 10/15/2003 - 15:18
User Badges:
  • Bronze, 100 points or more

MGCP mode is the problem. In this mode, the router is a dumb client and CM tells it everything to do.

If you change to H.323 mode, you can use the dial-peers as you mentioned.


This Discussion