×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Group DS0's from multiple trunks

Unanswered Question
Oct 22nd, 2003
User Badges:
  • Silver, 250 points or more

AS5400-HPX and multiple TDM carriers entering my VoIP network via CT3. I know that using trunk grouping feature I can group trunks, ie, full T1's, and assign the trunk group to dial-peers and do whole lot of stuff.


What I am looking for is, if there is a way to group say 5- ds0 from say 10- T1's together into a group, and use that group into a dial-peer?


Thanks,

Partha

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
pbarman Fri, 10/24/2003 - 08:26
User Badges:
  • Silver, 250 points or more

Yeah, I figured it out. Below is a sample example. However, we can do it only with CAS trunks. Is there a way to accomplish this in a PRI?


controller T1 7/1

framing esf

linecode ami

ds0-group 1 timeslots 1-4 type e&m-fgb dtmf dnis

ds0-group 2 timeslots 5-8 type e&m-fgb dtmf dnis

ds0-group 3 timeslots 9-12 type e&m-fgb dtmf dnis

ds0-group 4 timeslots 13-16 type e&m-fgb dtmf dnis

ds0-group 5 timeslots 17-20 type e&m-fgb dtmf dnis

ds0-group 6 timeslots 21-24 type e&m-fgb dtmf dnis

cas-custom 1

trunk-group 11

cas-custom 2

trunk-group 11

cas-custom 3

trunk-group 11

cas-custom 4

trunk-group 11

cas-custom 5

trunk-group 11

cas-custom 6

trunk-group 11

Actions

This Discussion