Remote sites to balance with RIPv2 protocol

Unanswered Question
Oct 27th, 2003
User Badges:

I have some sites which advertise the networks with RIPv2 to the backbone network.

There are 2 backbone routers to collect these sites.

Backbone routers are running BGP with other backbone routers.

I would like to balance the sites on both backbone collect routers.

Each remote site has got 2 CVP FR connections (DLCI 100 and 200)to these collect routers.

So I plan to configure for example

site1#

router rip

...

offset-list 0 in 5 Serial0/0.200

offset-list 0 out 5 Serial0/0.200


site2#

router rip

...

offset-list 0 in 5 Serial0/0.100

offset-list 0 out 5 Serial0/0.100


Is there another method , I would like to use the tags but are they advertised through RIP updates ? And a route-map is necessary on the sites to set the tags, isn't it ?


Thanks in advance




  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
guyber Mon, 10/27/2003 - 07:06
User Badges:

I have moved the question into the WAN routing part.Regards

Actions

This Discussion