cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
383
Views
0
Helpful
1
Replies

SNTP on CSS 11152

levter
Level 1
Level 1

Trying to poll time from Catalyst 2924. PIX is doing this just fine. CSS can ping ip address of the switch and other verse. I can see with debug that requests coming to the switch and ntp packets are sent back.

Can somebody help?

Below is some additional info.

P.S. After reboot and issue sntp server ... command it stay in up state but looks like packets never received and after 180 seconds it goes DOWN.

CSS1# sh clo

Date: 10-06-2003

Time: 12:10:27

TimeZone: PST: -08:+00:+00

CSS1# sh run

....

sntp poll-interval 60

sntp server 192.168.100.111 version 3

CSS1# sh ver

Version: ap0610107a (6.10 Build 107)

Flash (Locked): 4.01 Build 32

Flash (Operational): 6.10 Build 107

Type: PRIMARY

Licensed Cmd Set(s): Standard Feature Set

Enhanced Feature Set

Secure Management

sw1#

Nov 6 12:15:39 PST: NTP: rcv packet from 192.168.100.121:

Nov 6 12:15:39 PST: leap 0, mode 3, version 3, stratum 0, ppoll 1

Nov 6 12:15:39 PST: rtdel 0000 (0.000), rtdsp 0000 (0.000), refid 00000000 (0.0.0.0)

Nov 6 12:15:39 PST: ref 00000000.00000000 (16:00:00.000 PST Wed Dec 31 1899)

Nov 6 12:15:39 PST: org 00000000.00000000 (16:00:00.000 PST Wed Dec 31 1899)

Nov 6 12:15:39 PST: rec 00000000.00000000 (16:00:00.000 PST Wed Dec 31 1899)

Nov 6 12:15:39 PST: xmt 00000000.00000000 (16:00:00.000 PST Wed Dec 31 1899)

Nov 6 12:15:39 PST: inp C3552A6B.28A9B030 (12:15:39.158 PST Thu Nov 6 2003)

Nov 6 12:15:39 PST: NTP: stateless xmit packet to 192.168.100.121:

Nov 6 12:15:39 PST: leap 0, mode 4, version 3, stratum 2, ppoll 16

Nov 6 12:15:39 PST: rtdel 2264 (134.338), rtdsp 11F0 (70.068), refid C0052928 (192.5.41.40)

Nov 6 12:15:39 PST: ref C35529A4.8B3C174A (12:12:20.543 PST Thu Nov 6 2003)

Nov 6 12:15:39 PST: org 00000000.00000000 (16:00:00.000 PST Wed Dec 31 1899)

Nov 6 12:15:39 PST: rec C3552A6B.28A9B030 (12:15:39.158 PST Thu Nov 6 2003)

Nov 6 12:15:39 PST: xmt C3552A6B.2AFC93FA (12:15:39.167 PST Thu Nov 6

Thank you.

1 Reply 1

peucale
Level 1
Level 1

Hi,

in the trace you can see that the packets are coming from 192.168.100.121, but in the config there is 192.168.100.111 configured. Maybe that is the problem...

-alex

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: