cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1307
Views
0
Helpful
5
Replies

PIX515 - How to save image to TFTP server?

shen.lu
Level 1
Level 1

From PIX 515 manual, I read "how to download a PIX 515 image over TFTP", but I cannot find "how to save image to TFTP server". I think I must save first and then am able to download. Please advice, thanks in advance.

5 Replies 5

jmia
Level 7
Level 7

Hi -

Don't know if you've read the following document, hope this helps.

http://www.okena.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094a5d.shtml

Regards.

Actually, I looked at this document and it didn't have copy flash tftp...

lwierenga
Level 1
Level 1

copy flash tftp as opposed to copy tftp flash

Just remember copy source >> destination

'copy flash tftp' doesn't work, at least with Pix 6.1(3). Instead use 'write net []:'.

bd

sorry guys, there is no way to copy the IOS image (say 6.3.1) from the PIX to a TFTP server, you can only copy from the TFTP server to the PIX;

copy tftp flash:IMAGE

Just for reference:

write net tftp_IP:filename

will only copy the config file from the PIX to the TFTP server (not the IOS image).

copy flash tftp

only works on a router.

Hope this helps

Jeff

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: