×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Channelized DS3 / ISDN PRI - Interface for 72xx

Unanswered Question
Nov 12th, 2003
User Badges:

We are trying to use a channelized DS3/PRI for isdn back up. The router platform is a 7206vxr and we purchased the PA-MC-2T3+ to connect. Per Cisco that interface will not create PRI controllers just T1 controllers. The PA-MC-T3 is said to support PRIs on a channelized DS3, but we can find no confirmation on CCO. Has anyone used the PA-MC-T3 for PRIs??

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mchin345 Tue, 11/18/2003 - 08:15
User Badges:
  • Silver, 250 points or more

DS3 is upported in the below cards. Check the link also


PA-T3+, PA-T3+=


One-port clear-channel DS3 port adapter

Recommended for high-performance uplink and trunking applications

PA-2T3+

PA-2T3+=


Two-port clear-channel DS3 port adapter

Recommended for high-density or T3 line aggregation applications

http://www.cisco.com/warp/public/cc/pd/ifaa/pa/prodlit/pods3_ds.htm

Actions

This Discussion