IPX inter-vlan routing

Unanswered Question
Nov 14th, 2003
User Badges:

Hi


We need to setup a 6509 switch to allow inter-vlan routing. The routing should handle ip and ipx.

The 6509 is installed a msfc2 with supervisor engine 1A.


My question is that, do I need to upgrade or buy anything to make ipx routing work between different vlan? Or the existing setup is ok?


Best Regards

Raymond Chow

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
ashok_boin Fri, 11/14/2003 - 06:14
User Badges:
  • Bronze, 100 points or more

Hi,

This is from Cisco.

The MSFC—in combination with the PFC—provides 15 million packets per second (Mpps) of forwarding performance for IP, IPX®, and IP Multicast traffic, in addition to supporting multiprotocol routing for AppleTalk, DecNet, and Vines for Enterprise customers.


I think you are having PFC because you are doing IP intervlan routing. Then, it'll support, no need.


This might help...


http://www.cisco.com/warp/public/cc/pd/si/casi/ca6000/prodlit/c6000_si.htm


Regards...


Ashok.


s2193988 Fri, 11/14/2003 - 09:50
User Badges:

Hi

do I need the following software feature?


Part number: S6MSF2DV-12119E


Raymond

Actions

This Discussion