×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Single number solution for voice/fax

Unanswered Question
Nov 17th, 2003
User Badges:

Has anyone used a single number solution for voice/fax for Unity using:


-T.37 on ramp IOS fax gateway

-Fax Detection Feature for IOS gateway

-Unity IP FaxRouter


I'd like to know if this is possible and what, if any pitfalls, I should be aware of?


Thanks.


Manish

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vmalhi Tue, 11/18/2003 - 01:49
User Badges:

I've been running T.37 fax, it works pretty well (both on-ramp and off-ramp).


The biggest problem I have is radius accounting- I can create stop records but not start records meaning I can't use my normal VoIP billing system to bill for fax.


Never used fax detection or unity faxrouter.

ngss Mon, 12/22/2003 - 20:32
User Badges:

I aslo the requirement of using Fax Detection feature using Cisco 3745 as Voice Gateway


Really appreciate if anyone had tested this feature and share the experience here.


I need your sound advice whether this is a viable solution or stick to separate voice and fax number.


I only have this page for reference.


http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t11/faxapp/detect.htm


Thanks


SSng

Actions

This Discussion