I am not able to remove crypto map SONZOGNI^@

dcristoni · ‎11-20-2003

Please,show me the command to remove crypto map SONZOGNI^@ .

Command "no crypto map SONZOGNI^@" doesn't work,Router Cli response is crypto map unexisting.

The Router model is 3640.

Thanks

12.0

service timestamps debug datetime localtime show-timezone

service timestamps log datetime localtime show-timezone

service password-encryption

!

boot system flash:c3640-is40-mz.120-24.bin

logging buffered 32000 debugging

no logging console

ip subnet-zero

no ip source-route

no ip finger

no ip domain-lookup

isdn switch-type primary-net5

!

crypto map SONZOGNI^@ 1

set peer cisco-sonzogni

match address sonzogni-encrypt

clock timezone CET 1

clock summer-time CET-SUM recurring last Sun Mar 3:00 last Sun Oct 3:00

call-history-mib max-size 200

Georg Pauwen · ‎11-20-2003

Hello,

try:

no crypto map map-name seq-num

that is, also the sequence number.

Regards,

Georg

dcristoni · ‎11-21-2003

Hello,

unfortunately i have already tried with command "no crypto map map-name seq-num" but it didn't work.

^@ is my problem!

nihal.akbulut · ‎11-21-2003

Hi,

Sometimes I live the same problem, too. It's because of the hyperterminal. In some hyperterminals, when I use the uparrow to write the last command again it writes the last command but it appends ^@ characters and return.Maybe u can use a trick like that. If you first write "no crypto map SONZOGNI" end enter, after that use uparrow key. it automaticly writes "no crypto map SONZOGNI^@". maybe it makes sense.

hope it works..

dcristoni · ‎11-21-2003

I tried to follow your advice but it doesn't work because my hyperteminal doesn't append ^@.

Can you give me a configuration of hyperteminal to simulate that defect?

The last solution is a reset and rewrite configuration but the router is a backbone machine and i can't do it.

Thanks

nihal.akbulut · ‎12-01-2003

Hi,

I exactly don't know the configuration. It works that way on some XP machines by default. But if you want I can send you the hyperterm.exe ..

dcristoni · ‎12-03-2003

Hi,

Thanks for your help,don't worry!

Tomorrow i will erase nvram memory.