×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Help OUT service policy problem on c10k 24-P-T1-E1 card !!!!

Unanswered Question
Dec 30th, 2003
User Badges:

Hi,


Am trying to configure the following on ESR C10k with 24P-T1-E1 card with IOS c10k-p10-mz.120-23.SX.bin and FR encapsulation


map-class frame-relay OUT_FR_MAP_CLASS_bollywood_t1-e1-qos

service-policy input IN_bollywood_t1-e1-qos

service-policy output OUT_bollywood_t1-e1-qos

frame-relay fragment

!

interface Serial1/0/2:1.91 point-to-point

frame-relay interface-dlci 91

class OUT_FR_MAP_CLASS_bollywood_t1-e1-qos


entering the cmd class OUT_FR_MAP_CLASS_bollywood_t1-e1-qos give me the following error:


OUT_bollywood_t1-e1-qos cannot be used on a subinterface.


Any clue on the error!!!!


thx

hanu


PS: policies IN and OUT hs been defined and configured with relevent class cmd.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion