×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cat6513 Etherchannel & Trunk?

Unanswered Question
Jan 5th, 2004
User Badges:

I am converting a cat6513 to IOS. It's currently connected to 7 cat3500XL via gig ports. Gig ports are span between two blades on the 6513 created etherchannels to all cat3500xl (example: 6513 port 3/1 and 4/1 connected to cat3500-1 port 0/1 and 0/2). We are trunking vlans on these etherchannels. Because I have a short window for this project, I wanted to create the new config before blowing it up. Can someone please verify the below etherchannel and trunk config? Thanks in advance.



interface Port-channel1

description to IWD-01-A-3524-1B

no ip address

switchport

switchport mode access

spanning-tree portfast

switchport trunk encapsulation dot1q

switchport mode trunk

switchport trunk allowed vlan 1,3



interface GigabitEthernet3/1

description to IWD-01-A-3524-1B 0/1

no ip address

logging event link-status

logging event bundle-status

switchport

channel-group 1 mode on


interface GigabitEthernet4/1

description to IWD-01-A-3524-1B 0/2

no ip address

logging event link-status

logging event bundle-status

switchport

channel-group 1 mode on


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
wsitu Mon, 01/05/2004 - 18:24
User Badges:

Excellent white paper. Thank you very much.

Actions

This Discussion