×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Catalyst 6509 - upgrade from Cat OS to IOS

Unanswered Question
Jan 12th, 2004
User Badges:

Hi


We have a catalyst 6509 switch with a Sup1 / MSFC / PFC card and planning to upgrade from Cat OS to IOS. We would like to know if we can upgrade the switch running the following configuration to IOS.


Mod Slot Ports Module-Type Model Status

--- ---- ----- ------------------------- ------------------- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC ok

3 3 16 1000BaseSX Ethernet WS-X6416-GE-MT ok

4 4 48 10/100BaseTX (RJ-45) WS-X6248-RJ-45 ok


Mod Module-Name Serial-Num

--- ------------------- -----------

1 SAD040304KJ

15 SAD04010CD5

3 SAD040906S4

4 SAD04080CNF


Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------

1 00-d0-bc-f4-41-76 to 00-d0-bc-f4-41-77 3.1 5.3(1) 5.3(2)CSX

00-d0-bc-f4-41-74 to 00-d0-bc-f4-41-75

00-d0-00-cc-c4-00 to 00-d0-00-cc-c7-ff

15 00-d0-bc-f4-41-78 to 00-d0-bc-f4-41-b7 1.3 12.0(7)XE2 12.0(7)XE2,

3 00-30-96-2f-32-50 to 00-30-96-2f-32-5f 1.0 5.3(1) 5.3(2)CSX

4 00-30-19-c7-d2-90 to 00-30-19-c7-d2-bf 1.1 4.2(0.24)V 5.3(2)CSX


Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- ----------------------- ------------------- ----------- ------

1 L3 Switching Engine WS-F6K-PFC SAD040202BA 1.0


-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name

1 .. ffffffff 671e2eaa 49e1e4 25 4579681 Dec 31 1999 23:59:59 cat6000-sup.

5-3-2-CSX.bin


Any assistance will be appreciated.



Thanks


Kumar



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion