×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

7206 Fastethernet problem

Unanswered Question
Jan 21st, 2004
User Badges:

We are trying to cross-connect a 7206 NPE300 router's FastEthernet with another ethernet device. but the line protocol does not come up. We tried to cross-connect the ethernet device to a 3640 router using the same cross-cable and it works.


Are there any settings to configure on the 7206 Fastethernet?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
alvincdc Wed, 01/21/2004 - 02:31
User Badges:

Well, 7206 Fastethernet works using a straight cable when connected to a switch. But when we tried connecting it to a wireless ethernet interface using a cross-cable it won't come up. We also tried interconnecting it with a Juniper router FAstethernet using a cross-cable but still doesn't work.



Actions

This Discussion