01-26-2004 09:55 PM - edited 03-02-2019 01:10 PM
Hi Sir,
Can an NM-2E2W attached to a Cisco 3600 series router supports WIC-2T card? If no, what is the reason?
Thanks.
Delon.
01-26-2004 10:21 PM
I think yes, NM2E2W supports wic-2T card
Rgds
Homin
01-27-2004 12:36 AM
Hi Homin,
I found some info related to wic-2t from the following URL http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a00800b0858.shtml
What do you think?
01-27-2004 12:35 AM
Hi Delon
According to:
http://www.cisco.com/en/US/products/hw/modules/ps3129/products_tech_note09186a00800b0858.shtml#plat
in 3600 series WIC-2T is not supported with Ethernet Network Modules:
"The NM-1E2W, NM-1E1R2W, and NM-2E2W Network Modules do not have enough performance power to support the WIC-2T due to hardware limitations."
You will need a Fast Ethernet NM to support WIC-2T in a 3600 series
HTH
01-27-2004 09:34 PM
Hi,
The previous answer is right.NM-2W or NM-FE modules will support WIC-2T.Sorry for the wrong assumption.
Rgds
Homin
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: