×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Binding dialers to specific BRI using a single pool

Unanswered Question
Jan 30th, 2004
User Badges:

I have a dialer pool with 4 members (BRI0/0, BRI0/1..) and 4 dialer profiles (dialer1,dialer2...).

I would like to configure the router in a way that EVERY DIALER HAS ITS OWN PREFERRED BRI but can use other bri if necessary.

Dialer1 should use bri0/1, Dialer2 bri0/2, but both could also use bri0/4 in emergency.

"dialer pool-member priority" is not useful for this purpose because it simply gives a higher priority to a member of the pool (bri) no matter which is the dialer requesting it.

Any suggestion or advice?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
nihanth Fri, 01/30/2004 - 14:07
User Badges:

take dialer1, dialer2 static routing default AD value for routing.


configure dialer3, dialer4 on bri 0/4 to locations where dia1, dia2 has been configured. give static routing Administrative distance (AD) value 10 for these routes ( dia3 and dia4).



remote end ...


dialer 0 to your end bri 0/1

dialer 1 to your end bri 0/4



dialer 0 to your end bri 0/2

dialer 1 to your end bri 0/4


I think your prob. might be solved.




sisal Mon, 02/02/2004 - 03:06
User Badges:

Thank you for your answer. I am a bit confused though.

Do you mean that I must define 4 different dialers each with his BRI and AD (Administrative distance not metric?) for each destination? This would result in 16 dialer definitions... Am I missing something? If so, can you further explain your suggestion? An example would be great indeed!

vcjones Fri, 01/30/2004 - 17:45
User Badges:
  • Silver, 250 points or more

Each BRI can be a member of multiple pools, so simply define four pools and assign each BRI to all four, weighting each as desired for the dialer using that particular pool.


Good luck and have fun!


Vincent C Jones

www.networkingunlimited.com

sisal Mon, 02/02/2004 - 02:16
User Badges:

I hoped there way to avoid the 4 pools. Anyway that's not a problem. Thanks for your reply.

Actions

This Discussion