×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

vpn3000 (v4.1) : WebVPN & Radius (IAS)

Unanswered Question
Feb 13th, 2004
User Badges:

Hi,

I've create a group to apply some specifics port redirections.

It working fine with internal users & nt domain!

But when I use a radius server (IAS) for authentification, the port

redirection is not apply ?

Is somebody have the same problem ??

Thanks

Damien


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
HEATH FREEL Fri, 02/13/2004 - 06:00
User Badges:

To use RADIUS within groups for WebVPN you must set an aditional Attribute in the RADIUS Server.


Assigning WebVPN Users to Groups

Using a RADIUS server to authenticate users, assign users to groups by following these steps:



--------------------------------------------------------------------------------

Step 1 Authenticate the user with RADIUS and use the Class attribute to assign that user to a particular group.



Step 2 Set the class attribute to the group name in the format OU=group_name


For example, to set a WebVPN user to the SSL_VPN group, set the Radius Class Attribute to a value of OU=SSL_VPN; (Don't omit the semicolon.)



hwrt Fri, 02/13/2004 - 06:35
User Badges:

Thanks

it resolve my issue !

Regards

Damien

Actions

This Discussion