URGENT!!! - Cat6509 and DLSW

Unanswered Question
Feb 25th, 2004
User Badges:

Please does the below support DLSW. We are trying to connect Ethernet to Ethernet to pass SNA traffic though. Our end is a Cat6509 with Show module as below. Will the below support this. ?


Thanks


Mod Slot Ports Module-Type Model Sub Status

--- ---- ----- ------------------------- ------------------- --- --------

1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok

15 1 1 Multilayer Switch Feature WS-F6K-MSFC no ok

2 2 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes standby

16 2 1 Multilayer Switch Feature WS-F6K-MSFC no ok

3 3 8 1000BaseX Ethernet WS-X6408-GBIC no ok

5 5 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok

6 6 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok

7 7 48 10/100BaseTX Ethernet WS-X6248-RJ-45 no ok

8 8 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok

9 9 16 1000BaseSX Ethernet WS-X6416-GE-MT no ok


The MSFC in the Cat6509 has the following show version


Cisco Internetwork Operating System Software

IOS (tm) MSFC Software (C6MSFC-JSV-M), Version 12.1(13)E1, EARLY DEPLOYMENT RELE

ASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2002 by cisco Systems, Inc.

Compiled Thu 07-Nov-02 23:25 by eaarmas

Image text-base: 0x60008BD8, data-base: 0x61B22000


ROM: System Bootstrap, Version 12.0(3)XE, RELEASE SOFTWARE

BOOTLDR: MSFC Software (C6MSFC-BOOT-M), Version 12.1(3a)E4, EARLY DEPLOYMENT REL

EASE SOFTWARE (fc1)


Thanks



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
vmiller Wed, 02/25/2004 - 08:24
User Badges:
  • Gold, 750 points or more

It should. Make sure your code has the IBM feature set.

londint Thu, 02/26/2004 - 02:39
User Badges:

Thanks


What do you mean by IBM feature set?


Thanks

Actions

This Discussion