cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
460
Views
0
Helpful
1
Replies

IP Forwarding Agent / DHCP Client, Virtual IP Router

jreimer
Level 1
Level 1

I have a problem with some of my clients. They have static IP's but attach to the AP350 with address 0.0.0.0 and with : "OK, WEP, IP Forwarding Agent, BOOTP/DHCP Client, IP Virtual Router." in the Status cell.

What would cause this?

Thanks.

1 Reply 1

lisa.hall
Level 2
Level 2

Can you check if you have enabled Broadcast key rotation. When you enable broadcast key rotation, only wireless client devices using LEAP or EAP-TLS authentication can use the access point. Client devices using static WEP (with open, shared key, or EAP-MD5 authentication) cannot use the access point when you enable broadcast key rotation. This may be the reason for your problem.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: