PRI switch types

larrys · ‎03-15-2004

which of the cisco pri switch type should be used to connect to a PBX which supports

""- Euro-ISDN E-DSS1and ETSI-compliant""

Many thanks

Larry_s

chuck.price · ‎03-15-2004

For the E-DSS1 you'd use switch type basic-net3.

Here's a link to the different Cisco supported ISDN switch types.

http://www.cisco.com/en/US/customer/products/sw/iosswrel/ps1818/products_command_reference_chapter09186a008007ff75.html

larrys · ‎03-16-2004

Chuck

Thanks for the reply

Can a PRI interface be configured for Basic-Net3

I know this id normally a BRI switch type.

Larry_s

chuck.price · ‎03-17-2004

It should be able to be configured. It is not a BRI only switch type. According to Cisco this is what basic-net3 is for. To verify you could call your provider for more info.

basic-net3 NET3 ISDN and Euro-ISDN switches (UK and others), also called E-DSS1 or DSS1