×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Newbie PIX-501 config

Unanswered Question
Mar 26th, 2004
User Badges:
  • Bronze, 100 points or more

I have very little exp with router/firewall. I have the vpn working using the PDM wizard. I want to make my websever avail to the outside. I am not understanding what command combinations allow port 80 traffic through and forward to my internal web server. I am assuming I can do both VPN connections and webserver forwarding with a single public ip address.


Thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Anonymous (not verified) Fri, 03/26/2004 - 14:34
User Badges:

I have 1 public IP addresses assigned to the pix (Does that put me running pat?) It is the address assigned to the Outside interface. I have 2 more avail Public IP's if I need them.

bahoosh Wed, 06/23/2004 - 11:51
User Badges:

All you need is two statemnets ... one static and one access-list


it goes something like this:


static (inside,outside) your_public_ip your_www_ip net 255.255.255.255


access-l outside_in permit tcp any host your_www_ip eq www

Actions

This Discussion