03-26-2004 11:38 AM - edited 03-09-2019 06:53 AM
I have very little exp with router/firewall. I have the vpn working using the PDM wizard. I want to make my websever avail to the outside. I am not understanding what command combinations allow port 80 traffic through and forward to my internal web server. I am assuming I can do both VPN connections and webserver forwarding with a single public ip address.
Thanks!
03-26-2004 01:45 PM
are you running nat, pat (you only have one legitimate external ip address), or neither?
03-26-2004 02:34 PM
I have 1 public IP addresses assigned to the pix (Does that put me running pat?) It is the address assigned to the Outside interface. I have 2 more avail Public IP's if I need them.
06-23-2004 11:51 AM
All you need is two statemnets ... one static and one access-list
it goes something like this:
static (inside,outside) your_public_ip your_www_ip net 255.255.255.255
access-l outside_in permit tcp any host your_www_ip eq www
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide