04-05-2004 09:27 AM - edited 03-02-2019 02:48 PM
Cisco IOS ver 12.0(7)XK1 was install on a Cisco 2620 router with 16MB Flash and 40MB RAM. It was recently discovered that conducting a ping or traceroute (through the router) caused the router to reload.
I am seeking suggestions on how to rectify this problem. All comments are welcomed
Thanks
IKRG
04-05-2004 04:36 PM
12.07)XK1 is actually pretty old. If you only need IP Plus, I would recommend 12.2(23), which is the latest GD release.
Hope this helps,
04-05-2004 05:03 PM
I just double checked and you will not be able to run 12.2(23) with the amount of memory you have since it requires 16M Flash and 48M DRAM. You can run 12.1(22b) though, which is the latest in the 12.1 train.
Hope this helps,
04-07-2004 10:41 AM
Thanks for replying to my message. I will try IOS ver 12.1.
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide