×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

DLSW NETBIOS reachability cache list EMPTY

Unanswered Question
Apr 6th, 2004
User Badges:

Hi,

I've 2 router with peer DLSW between 2 lan.


I need that netbios hosts can communicate using DLSW.

I've some offices that are working fine with the attached conf.


You can see that the NETBIOS reachability cache list is empty !!! on one side.

I don't known why ?


***********


cisco 1720 with 12.2.8T5 ibm


sh dlsw peers

Peers: state pkts_rx pkts_tx type drops ckts TCP uptime

TCP r.r.r.r CONNECT 26634 2497 conf 0 0 0 20:50:23


DLSw Local NetBIOS Name reachability cache list

NetBIOS Name status Loc. port rif


DLSw Remote NetBIOS Name reachability cache list

NetBIOS Name status Loc. peer

A0208050 FOUND REMOTE r.r.r.r (2065)


***CONF


dlsw local-peer peer-id l.l.l.l biu-segment

dlsw remote-peer 0 tcp r.r.r.r

dlsw bridge-group 1

!

interface Loopback0

ip address l.l.l.l o.o.o.o

!

interface FastEthernet0

ip address x.y.z.u

speed auto

bridge-group 1

!

bridge 1 protocol ieee

!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion