cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1047
Views
0
Helpful
2
Replies

How to:Display "Last configuration change"

b.w.jennings
Level 1
Level 1

How do I get my routers to display:

"Last configuration change" and

"configuration change since..."

and if possible can I trap on these?

1720 IOS=12.2

Thank you in advance,

Bart

1 Accepted Solution

Accepted Solutions

Richard Burts
Hall of Fame
Hall of Fame

To get those displays the router must be sure what date and time is. The best way to accomplish this is to run NTP and learn time from an NTP server. An alternative is to use the clock set command to set the time.

When the router has an authoritative time the display you want is automatic.

HTH

Rick

View solution in original post

2 Replies 2

Richard Burts
Hall of Fame
Hall of Fame

To get those displays the router must be sure what date and time is. The best way to accomplish this is to run NTP and learn time from an NTP server. An alternative is to use the clock set command to set the time.

When the router has an authoritative time the display you want is automatic.

HTH

Rick

b.w.jennings
Level 1
Level 1

Thanks!

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: