×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

How to configure VPN client 4x to VPN 3030 using ipsec over tcp and Microso

Unanswered Question
Apr 14th, 2004
User Badges:

Could someone here verify the configuration form me?

Setup:

VPN 4.01 client -> Linksys NAT router -> internet <- PIX 520 <- VPN 3030 (PIX DMZ) <- LAN

Configuration:

1. Permite inbound traffic on TCP port 10000 on PIX for VPN 3030

2. Enable ipsec over tcp on VPN 3030 in global configuration.

3. create vpn client profile for ipsec over tcp connection :

a. import microsoft root & personal certificates into cisco vpn client.

b. General tab: enable transparent tunneling, and select ipsec over tcp (NAT/PAT) option.

c. Authenication tab: select certificate

option.


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion