×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

1600 Router does not show T1 configuration

Unanswered Question
Apr 17th, 2004
User Badges:
  • Bronze, 100 points or more

I have a configuration with two 1600 routers connected witha T1 line. I am passing voice and data through this line.

The funny thing is that the system is working(some problems which rarely causes voice distortion) but show running-config command does not show the T1 configuration at all. How can that be? How can the system work and not show the existence of the T1 equipment?


Another similar connection shows the T1 configuration.

"interface Ethernet0

ip address 150.137.133.14 255.255.255.0

!

interface Serial0

description T1 (HCGS200933001MB) from EDS-2722 to EDS-2741

ip unnumbered Ethernet0

"


Any explanation? Can this missing configuration cause the problems I am experiencing?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
billtoth Sat, 04/17/2004 - 06:40
User Badges:

if your settings are all default then nothing will show up in he configs.


If you make a change (timeslots, encapsulation, etc.) it should appear.


hth


BT

Actions

This Discussion