×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

release complete or not release complete over h225

Unanswered Question
Apr 20th, 2004
User Badges:

we have two Siemens PBX connected via two C7206+VXC Modules over QSIG.

the problem is now that if the PBX 1 send a Disconnect with

Apr 19 01:01:47.566: ISDN Se3/0:15: RX <- DISCONNECT pd = 8 callref = 0xD8ED

Apr 19 01:01:47.566: Cause i = 0x809F - Normal, unspecified

the router do not send a release complete over h225 to the other Router.

the same router send a release complete over h225 if

Apr 19 01:02:02.406: ISDN Se1/0:15: RX <- DISCONNECT pd = 8 callref = 0x0031

Apr 19 01:02:02.406: Cause i = 0x8090 - Normal call clearing


received from the same PBX

is this normal and if why, and if no what can i do that ist works ?


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
smahbub Mon, 04/26/2004 - 07:00
User Badges:
  • Silver, 250 points or more

Try resetting the serial interface by shut and no shut. Or reload could release some of these states. This could solve the issue.


Actions

This Discussion