07-14-2004 08:30 AM - edited 03-02-2019 05:04 PM
Is there anything to configure on the Sup 720 to use
port 2 as TX (RJ45) instead the SFP port ?
Thanks, Wolfgang
07-14-2004 06:57 PM
Yes..You will need to configure the media type. By default it is the SFP port.
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/sup720.htm#wp1051988
In CAT OS, you would do
set port media-type mod/port {rj45 | sfp}
09-30-2004 12:44 PM
Is this port supposed to support full duplex? I'm running 8.3(3) and I get an error saying that full duplex isn't supported on this port. When I do a show port capabilites, it says that only half duplex is supported. Is there something I'm missing?
09-30-2004 01:23 PM
There is an internal bug for this issue
CSCef54418
Sup720 uplink 5/2 failed to set duplex with 10/100 speed.
Fix will be in 8.4(x) expected during end of October
09-30-2004 03:59 PM
Thanks! That's exactly what I was looking for. I appreciate the detailed, fast response.
10-05-2004 05:22 AM
I've got two 6509's running 8.3(3) connected via the Sup720 5/2 ports, both set as media type RJ45. One is forced to full/1000, and the other is set to auto/auto. The full/1000 side is running full/1000, and the auto/auto side is running a-full/a-1gb. Showing port capabilities does report each port as only capable of half duplex. Is the 'show port' command incorrectly reporting the ports running at full duplex?
10-13-2004 07:46 AM
Thats part of the problem. It can do full duplex but reports it can do half duplex in sh port capabilities.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: