cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
437168
Views
15
Helpful
5
Replies

howto save Running Config File from CLI ?

piotrkrol
Level 1
Level 1

hi

howto save Running Config File from CLI by Cisco Router WS-C3550-12T ?

I mean all changes after restart will be saved.

kind regards

p.k.

3 Accepted Solutions

Accepted Solutions

rsissons
Level 5
Level 5

The CLI command is

Copy running-config startup-config

View solution in original post

Or the much easier old time command "write memory" .

Not sure why they decided to substitute some easier commands like write mem or specially write net for some long convoluted string they want you to use now .

View solution in original post

It is asking you for a file name in case you want to save the config separately. The default filename is "startup-config", which is the one it will read when it boots. Just hit ENTER.

Kevin Dorrell

Luxembourg

View solution in original post

5 Replies 5

rsissons
Level 5
Level 5

The CLI command is

Copy running-config startup-config

Or the much easier old time command "write memory" .

Not sure why they decided to substitute some easier commands like write mem or specially write net for some long convoluted string they want you to use now .

Destination filename [startup-config]?

and how can I find out the name of the startup-config file ?

It is asking you for a file name in case you want to save the config separately. The default filename is "startup-config", which is the one it will read when it boots. Just hit ENTER.

Kevin Dorrell

Luxembourg

thanks !

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: