We have a network with 2 cisco 4506 switches and 20 cisco 2950 switches. Recently we activated vmps and everything works fine except a wake on lan problem. When a pc that is connected to a port in dynamic mode and the pc is turned off, the port goes into a unassigned vlan and doesn't receive the wake on lan packet.
port config :
switchport access vlan dynamic
switchport mode access
spanning-tree guard root
result of the show interface status cmd :
Fa0/8 connected unassigned a-full a-100 10/100BaseTX
I can configure the 4506 switches to "forward" a wol packet from one vlan to another (conversion to multicast and back) but i don't know if is its posible to the "unassigned" vlan.
Any idea to solve this problem?