02-20-2005 10:44 PM
I'd like to get monthly port traffic reports on 3 2950's in a cluster. I'd also like to be able to monitor 3 routers in 3 locations for bandwidth utilization.
What is not over the top expensive as there is not a lot of money to be spent?
02-21-2005 09:04 AM
Two of my favorite free open-source products, Cricket or MRTG.
http://cricket.sourceforge.net/
http://people.ee.ethz.ch/~oetiker/webtools/mrtg/
HTH
Steve
Rate if helpful....
02-21-2005 09:29 AM
In hindsight, I don't think I was entirely clear as to what I need. When I said I wanted to know the aggregate amount of bandwidth per port on the Cisco switches, I mean each of the 24 ports on the switches. I don't need to know the usage of port 80, 22, 23, etc. (I sure do wish I knew how to explain this easier. ;-)
02-21-2005 04:49 PM
Your explanation was fine. Look at either of the two products I linked above. They should provide exactly what you're looking for.
HTH
Steve
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide