Reporting on Port Bandwidth Usage & Router Utilization

rameeti00 · ‎02-20-2005

I'd like to get monthly port traffic reports on 3 2950's in a cluster. I'd also like to be able to monitor 3 routers in 3 locations for bandwidth utilization.

What is not over the top expensive as there is not a lot of money to be spent?

steve.busby · ‎02-21-2005

Two of my favorite free open-source products, Cricket or MRTG.

http://cricket.sourceforge.net/

http://people.ee.ethz.ch/~oetiker/webtools/mrtg/

HTH

Steve

Rate if helpful....

rameeti00 · ‎02-21-2005

In hindsight, I don't think I was entirely clear as to what I need. When I said I wanted to know the aggregate amount of bandwidth per port on the Cisco switches, I mean each of the 24 ports on the switches. I don't need to know the usage of port 80, 22, 23, etc. (I sure do wish I knew how to explain this easier. ;-)

steve.busby · ‎02-21-2005

Your explanation was fine. Look at either of the two products I linked above. They should provide exactly what you're looking for.

HTH

Steve