×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Asking about 1300 Typical Throughput (Mbps)

Unanswered Question
Sep 15th, 2005
User Badges:

Hi,


I would like to ask about BR1300, Please give an idea. What is the max throughtput can reach when using a pair of BR1300 point to point (2km) with DISH antenna (like FTP up/download rate)?

And what i need to tunning on BR1300 to gain this result?


Many Thanks!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ulstegner Tue, 11/29/2005 - 12:55
User Badges:

Hi,

this is depend on :

1. what location : ETSI/FCC

2. what terrain

3. antenna height

4 my be disruption, (interference)

5. cable loss


Note : the real throughput if you connected with 54 MBit/s is about 24 MBit/s (netto)


regards Ulrich

Hi Ulstenger,


I found that when i placed my 1310 next to each other I got around 22mbps, but when i put them in place ( in buildings next to each other) this has dropped signifcantly. Am now getting approx 12/13 mbps. Is this normal.


Are there any other settings I can optimize? I have done a carrier bust test and set them both on the cahnnel least congested,though the results of this can change every time you ruin this. Also I found there are upto 22 wlans in my area.


Any feedback would be greatly appreciated.

dsidley Fri, 12/09/2005 - 11:39
User Badges:

We have a 2mile link with the identical equipment and get 18Mbps...


That includes 802.1x with WPA (TKIP)

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode