Unanswered Question
Sep 17th, 2005
User Badges:

i am wondering how to configure ospf interface md 5 authentication on a pix ver 6.3...

at the same time, is it posible to set the pix as DR without doing any config at any of its peers, only one the pix. If so, what do I do?

thanks in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
mehrdad Sat, 09/17/2005 - 10:01
User Badges:
  • Bronze, 100 points or more

routing interface interface_name

Subcommands to the routing interface command:

ospf authentication message-digest

ospf message-digest-key key-id md5 key

ospf priority number

jenseike Sat, 09/17/2005 - 10:06
User Badges:

thanks man.. this was exactly what I was looking for..

I have one more Q to this. If I want summarize some networks after they are redistributed from my lan to my dmz... what to do..

thanks againb

mehrdad Sat, 09/17/2005 - 10:24
User Badges:
  • Bronze, 100 points or more

you can be able summarize intra-area routes through :

area area_id range address netmask

jenseike Sat, 09/17/2005 - 10:41
User Badges:

do you do this summarization in the ospf process where i am redistributin to since this should be after redistribution ?


This Discussion