×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Cisco 350AP - What happened?

Unanswered Question
Sep 18th, 2005
User Badges:

Hi all,


What happen to my Cisco 350 AP as below?


*********************************

Testing DRAM...

(press <esc> to bypass)

DRAM OK

Power-on reset.


Copyright 1996-2000 Cisco Systems, Inc.

Copyright 1984-2000 Wind River Systems, Inc.


System ID: 0040965ABFA5

Motherboard: MPC855 50MHz, 8192KB FLASH, 16384KB DRAM, Revision B0

Bootstrap Ver. 1.09: FLASH, CRC 710B6415 (OK)

Initialization: OK


Memory Bank total used left

DRAM 16738168 0 16738168

Config 524288 212 524076

FLASH 7733248 4291344 3441904


Memory Bank:File address size encoding type flags

a) Config:AWC_ConfigDB FE020000 212 AiroDB1 Data 0000

b) FLASH :IOS_Upgrade 1.0 FE0A0000 393268 none Exec 0801

c) FLASH :IOS_C350_BOOT 2 FE100034 393256 none 0x09 0800

d) FLASH :IOS_C350_TAR 2 FE16005C 3467304 none 0x0A 0800

e) FLASH :IOS_Upgrade_Envs 1.0 FE4AE884 136 none 0x0C 0800

f) FLASH :AWC PCMCIA FPGA 0.14 FE4AE90C 37380 none FPGA 0000

Cisco IOS automatic field upgrade image, ESC to terminate

..10....9....8....7....6....5....4....3....2....1..


upgrade: Compare ok first load file 0


upgrade: Compare ok first load file 1


upgrade: Compare ok first load file 3

upgrade: IOS Configuration component not available

upgrade: Invalid or missing installation key (BR350 not supported)!


Depress ESC key to reboot

**********************************


Please let me know what happen and how I could recover it.


Thanks a lot


Regards,

Ron

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
tcggg0 Thu, 09/22/2005 - 07:09
User Badges:

Where you trying to upgrade the IOS with bridge firmware (BR350). That is your last error message.

limleeheng Thu, 09/22/2005 - 09:00
User Badges:

I got this error after I upgrade to IOS for this AP350. This was the only error message I got.


Thanks!

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode