cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
223
Views
0
Helpful
1
Replies

bgp trough pix with doing conditional routing

jenseike
Level 1
Level 1

Can somwone help me with this :

R3 and r4 is in different AS..

Loopback 1 is on r3, and r4 do not have the net in the routing table anyhow, so I guess the config needs to be on r3,., I have never done this kind of config, so unsure of what to do. There are a pix between them

R3 Loopback 1 is : 10.10.11.11

R3 looback 0 is : 10.10.1.1

R4 loopback 0 is 10.10.2.2

There are ospf routes to pix, and static routes to r3 loopback0 on r4

I have this topology :

R3(ospf)------------------(ospf)pix------------------------r4

R3 should only learn bgp routes from r4 if loopback 1 of R3 is up..

How would I do this..r3 loopback 0 is peering with R4's loopback 0

Please, i am lookiing for some config example

1 Reply 1

subaa
Level 1
Level 1

Try this (and read the manual)

on R3

neighbor 10.10.2.2 advertise-map ADV exist-map EXIST,

where route-map ADV defines the routes to adv

and route-map EXIST defines R3's loopback.

A_a

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: